In the era of computer technology, printers are all about toner cartridges, therefore they are known as the soul of the printers. When ink in the cartridges begins to reduce, consequences begin appearing in the form of low printing quality copies. When ink in the cartridge runs out, you have to replace the cartridge to resume your task. You should learn the simple ways to replace the toner container in a laser printer. You should take the expert advice for this process or you can follow few important steps given below:-
Switch on Printer:-
You should attach your printer to a power supply and switch on the device. To access the toner cartridge easily, you need to keep printer on. If you don’t have knowledge, you should call at Printer technical support phone number 1-800-510-7358 instantly.
Access Toner Cartridges-
In certain printer models, you should press and hold the release key and pull printer lid towards you to get easy access to toner cartridges. In the most of printer models, when the cover is lifted, the carriage slides automatically to the right of the printer, therefore giving the quick access to toner cartridges.
Remove used cartridge-
As per printer model specification, you either have to detach the cradle holding cartridge or press the release tab inner to unlock used cartridge. While in few models, you can have to keep hold of the blue release key at the sideways of the carriage. When you try to open cartridge carriage, you should remove the used cartridge just by pulling it up. If you are unable to know this step, you should make direct call at Printer tech support phone number immediately.
Take Out New Cartridge-
This is very common that when printer cartridges are dispatches, every so often ink settles in the toner drum, therefore making low quality printouts. To overcome this technical issue, shake the cartridge softly that will distribute the toner via the container.
Eliminate packaging of new cartridge-
You have to separate the cartridge from its packaging and drag the colored tab on the cartridge that will diminish the protection tape from the lower end of the container. You have to keep in the mind to not touch the imaging drum situated on the foot of the container, as this may result of printing quality problems.
Insert the replacement cartridge inside-
You have to put new container inside, so you make sure that it snaps in the place of security. After this step, you have to take a test for a print, if you have replaced the cartridge successfully. If you face any technical issue, you should connect with certified technicians or call directly at Printer support phone number +1-800-510-7358 for immediate results.